Solutions
Solutions
Solutions

Mobile Energy Storage Vehicle Solution

Mobile Energy Storage Vehicle Solution

Summary: An all-purpose mobile energy fortress that flexibly supports backup power, emergency response and temporary loads, plug and play.

Solution Overview

Vehicle-mounted integrated energy storage and power conversion equipment delivers rapidly deployable mobile power to support backup power, emergency response and temporary loads.

Key Points

  • An all-purpose mobile energy fortress, plug and play
  • Vehicle-mounted PCS supports both grid-connected and off-grid operation
  • No civil works required; multiple vehicles can be paralleled for capacity expansion
  • Supports backup power, emergency response and temporary loads

Application Scenarios and Challenges

Large events, emergency repairs and disaster areas lack flexible power sources; fixed power stations are slow to build and difficult to relocate.

VGRID POWER System Composition

  • Power Conversion System (PCS): Vehicle-mounted bidirectional conversion, supporting both grid-connected and off-grid operation.
  • Static Transfer Switch (STS): Grid-connected/off-grid switching for rapid load connection.
  • Battery Energy Storage System (BESS): Automotive-grade batteries, highly safe and transportable.
  • Energy Management System (EMS): Vehicle-mounted monitoring and scheduling with remote visibility.
  • Microgrid AC Cabinet (MPS): Integrated into the vehicle-mounted all-in-one cabinet, plug and play.

Core Value

  • Rapid deployment, plug and play
  • Multiple scenarios: backup power, emergency response and temporary use
  • Replaces diesel emergency vehicles, cleaner
  • Multiple vehicles can be paralleled for capacity expansion

Typical Applications

Suitable for backup power at major events, grid emergency repairs, power supply in disaster areas and temporary construction sites.

Delivery and Support

VGRID POWER provides integrated delivery covering on-site assessment, system design, core equipment manufacturing (PCS/STS/BESS/MPS), commissioning and remote O&M. Please contact us for customized solutions and quotations.

Selection and implementation notes

  • Decide which unit forms the grid: island and weak-grid sites need a grid-forming PCS or a VSG to establish voltage and frequency.
  • Fix the converter rating from the continuous load and the overload factor before sizing the battery for the required autonomy.
  • Keep the EMS point table, firmware revision and wiring diagram under change control to avoid commissioning delays.
  • Verify the on/off-grid transfer time, the STS sequence and the protection settings with event logs and waveform captures.

Related products and resources

LEONA-H135K(SP135HAPSS)、SP375HAG2、SP125HSPS · technical guides · categories

Frequently asked questions

Does this project need a grid-forming PCS?

Island sites, weak grids, black-start duty and diesel coordination call for a grid-forming converter. A stiff grid with grid-tied-only operation can use a grid-following unit.

FAQ

Can a mobile energy storage vehicle connect to the grid and feed power in?

Yes. The onboard PCS can connect to the grid to provide short-term support for the distribution area, and can also operate off-grid to supply power on site.

Is transport and deployment convenient?

Integrated vehicle-mounted cabinet, plug-and-play on arrival, no civil works required, and multiple vehicles can be paralleled for capacity expansion.

How long can it supply power on a single full charge?

Depending on capacity and load, it typically supports temporary loads for several hours to several days.

Can it drive motor-type equipment?

Yes, the PCS supports inductive load starting and seamless switching between grid-connected and off-grid modes.

Products